 SolidSolid wood is milled from a single 3/4" thick piece of hardwood. Because of its thickness, a solid hardwood floor can be sanded and refinished over several generations of use. Solid wood flooring expands and contracts with changes in your home's relative humidity. Normally, installers compensate for this movement by leaving an expansion gap between the floor and the wall. Base molding or quarter round is traditionally used to hide the extra space. EngineeredEngineered wood is produced with three to five layers of hardwood. Each layer is stacked in a cross-grain configuration and bonded together under heat and pressure. As a result, engineered wood flooring is less likely to be affected by changes in humidity and can be installed at all levels of the home. Shaw Hardwood flooring offers two different engineered constructions:
- Shaw Engineered with Hardwood Core
- Shaw Engineered with High Density Fiberboard Core
Before deciding on Solid or Engineered hardwood flooring, consider these factors: Location, Location, LocationThe location of your hardwood flooring basically falls into three categories:
- On Grade - at ground level
- Above Grade - any second level or higher
- Below Grade - any floor below ground level, including basements or sunken living rooms.
Traditional solid hardwood flooring is not well suited for high moisture areas such as bathrooms or below-grade installations. The construction of an engineered hardwood gives it enhanced structural stability and moisture resistance that allows it to be installed at any grade level.
What type of subfloor do you have?If you plan to install over concrete, you must use an engineered product to ensure structural integrity. Solid wood flooring or Engineered flooring may be used over plywood, wood, or OSB subfloors. Will there be moisture in the room?If so, you'll want to select an Engineered hardwood. The moisture resistance of an engineered hardwood makes it suitable for rooms where moisture is a possibility, such as bathrooms.
|