try on a floor in our room
Choose a room from our Idea Gallery to see how different floors look with our
visualization tool.
try on a floor in your room
Upload a photo to our visualization tool and see our floors in your room.
|
-
- ROOM VIEW
- DETAIL
(shown in one color only)
|
|
|
Suncoast
|
Style: |
221SD |
|
Collection
: |
Tuftex |
|
Price Range: |
$5.00 - 5.49/sq. ft.
(Material Only)
Price Ranges
|
|
Fiber: |
Nylon |
|
Fiber Brand: |
|
|
Width: |
12' 0" |
Star Rating:
STAR RATING
|
|
Style Type: |
Pattern
Style Type
|
Stain Treatment:
Stainmaster |
|
Face Weight: |
48.80 oz./sq.yd. |
Backing:
Softbac Platinum |
|
|
|
- ENVIRONMENTAL
-
|
|
All Shaw carpet and carpet cushion products have been thoroughly tested by an independent,
certified laboratory and meet stringent criteria for low chemical emissions.
As a result, they have earned the Carpet and Rug Institute's Green Label Plus certification.
Learn more about the Green Label Plus program.
|
- PERFORMANCE
-
On a scale of 1 to 5, this carpet receives a
4.0
on a Hexapod test, which evaluates appearance retention after simulated foot traffic.
Shaw's performance rating is based on an international test method known as Hexapod.
This procedure evaluates appearance retention of carpet.
The instrument used to test the carpet is composed of a circular rotating drum with
carpet placed on the inside. Also placed inside the drum is an eight-pound steel
ball with six pods. As the drum rotates, the ball falls on the carpet face, simulating
footsteps.
After the standard number of rotations, carpets are then assessed using the Carpet
and Rug Institute (CRI) performance rating scale. The lowest rating of 1 means "severe
change in appearance" and the highest rating of 5 means "no change in appearance."
- FACE WEIGHT
-
The face weight for this style is 48.80 oz./sq.yd.
Face weight is measured as per unit area of pile yarn floor coverings according to
ASTM (American Society for Testing Materials) method D-5848. Due to several processes involved in manufacturing,
such as shearing, the actual finished weight may reflect a variance of up to 7%. The weight is determined by
compensating for the factor of commercial moisture regain, as defined in ASTM D-1909. The ASTM measurements
are accepted industry norms and the most accurate means of determining face weight.
|