Laminate

NATURAL VALUES II PLUS

The 15 Colors of Natural Values II Plus

  • ABBEYVILLE HCK
    00188
  • BIG BEND OAK
    00212
  • SUMMERVILLE PN
    00256
  • RICHLAND HCKRY
    00313
  • BRIDGEPORT PN
    00430
  • BROOKDALE WALN
    00638
  • FAIRFIELD PINE
    00651
  • RIO GRANDE CHR
    00800
  • TROPIC CHERRY
    00828
  • KINGS CNYN CHR
    00839
  • CASCADE MHGNY
    00841
  • MELLOW OAK
    00860
  • CRATER LAKE OA
    00861
  • BLACK CNYN CHR
    00913
  • PARKVIEW WLNT
    00933

Color N° 00313

RICHLAND HCKRY

All About ‘Natural Values II Plus’

This collection of appealing designs will make an impression! No matter what the look is-casual, urban, formal or informal - Natural Values II Plus laminate has a choice that's just right! Standout colors for every space, from quaint bungalow to chic condo to southern farmhouse. An added plus, the style has an attached pad!! Premium attached backing which reduces noise transmissions, offers easier installation and provides natural hardwood walk sound.

Product Specifications

Flooring Type

Laminate

Style

SL255
NATURAL VALUES II PLUS

Color

00313
RICHLAND HCKRY

Collection

Shaw Laminates

Finish

ENHANCED TEXTURE

Plank Width

7.99 in.

Plank Length

47.56 in.

Plank Thickness

5/16 in.

sq.ft.per

21.12

Edge Profile

SQUARE

Installation Method

Product Specifications
Installation Method
Installation Method
With hard surfaces flooring, you have several different installation options: Nail Down, Staple Down, Glue Down, and Floating. Some Shaw hard surfaces can be installed using more than one of the techniques described below.

NAIL
This installation technique is required for SOLID HARDWOOD construction. Using pneumatic or manual nailers, you or a professional installer will project cleats through the wood, fastening it directly to a suitable subfloor. SOLID construction, like it sounds, is milled from a single 3/4" thick piece of hardwood. Because of its thickness, a solid hardwood floor can be sanded and refinished over several generations of use. One of the characteristics of solid wood flooring is that it expands and contracts with changes in your home's relative humidity. Normally, installers compensate for this movement by leaving an expansion gap between the floor and the wall. Base molding or quarter round is traditionally used to hide the extra space.

This installation technique may also be applicable for ENGINEERED HARDWOOD construction, including EPIC, depending upon the product. ENGINEERED wood is produced with three to five layers of hardwood. Each layer is stacked in a cross-grain configuration and bonded together under heat and pressure. As a result, engineered wood flooring is less likely to be affected by changes in humidity and can be installed at all levels of the home.

STAPLE
This installation technique is an optional installation technique that can be used for both SOLID and ENGINEERED HARDWOODS. Using pneumatic staplers, you or a professional installer will project staples through the wood, fastening it directly to a suitable subfloor. This method is slightly simpler than the nail-down method.

GLUE
This installation technique is an optional technique that that can be used for ENGINEERED HARDWOODS. You or a professional installer will use an acrylic-based or urethane adhesive to adhere your new hardwood to a suitable subfloor. After applying the adhesive with a trowel, you should also use adhesive between the seams of your hardwood floor to complete and stabilize the installation.

This installation technique may also be applicable for dry-back RESILIENT TILES. You or a professional installer will use a special adhesive to adhere your new resilient tiles to a suitable subfloor. Some resilient tiles may be grouted, depending on the design of the product.

Standard RESILIENT SHEET vinyl requires the application of a full-spread adhesive that firmly secures the floor in place onto the subfloor. Expect moisture testing and some preparation of subfloors, according to their condition.

FLOAT
This installation technique is an option on certain ENGINEERED HARDWOODS. Rather than being attached directly to the subfloor with an adhesive, the flooring "floats" over an underlayment placed between the wood and the subfloor. Shaw floating engineered wood floors must be glued together at the tongue-and-groove joint to complete and stabilize the installation. This installation technique allows the floor to expand and contract. Shaw offers a variety of underlayment options for your specific installation.

This installation technique is also applicable for LAMINATE flooring, plank construction in tile or wood designs. This type of "floating" laminate floor is engineered so that the edges of the planks fit together and lock into place without glue or hardware. (Note: Some products require adhesive on the end seams of the first row only.) Since those floors are "floating", proper expansion space must be maintained at all vertical surfaces. Expect moisture testing and some preparation of subfloors, according to their condition.

Shaw also has a floating version of RESILIENT LVT flooring. Our StaTite planks and tiles stick to each other, not the floor. Expect moisture testing and some preparation of subfloors, according to their condition.

TILE AND STONE
To install CERAMIC TILE, PORCELAIN TILE, or STONE, a layer of adhesive (thin-set) mortar is applied to the proper subfloor with a trowel, and the tiles are set into it, leaving a consistently sized gap, or joint, between each one. After the adhesive dries, a special grout compound is packed into the joints, filling the spaces and creating a smooth, finished surface. Expect moisture testing and some preparation of subfloors, according to their condition.

You'll want to consider your installation options as you make your product selection. Your dealer will be able to help you decide what method will work best for your specific needs.
Back to Specs
FLOAT

Made in the USA

YES

Installation Grade

ABOVE, ON, BELOW

Tongue & Groove Profile

GLUELESS

Downloads

Natural Values II N Plus

Download PDF

Hard Surface Warranty - Care & Maintenance

Download PDF

Installation Instructions for 8in AG profile

Download PDF

Hard Surface Warranty - Care & Maintenance

Download PDF

Laminate Transition Pieces

4 Transition Pieces are Available:

Transition Pieces
Molding Track
Molding Track
Molding Track

Hold your moldings perfectly in place.

Back to Selection
Molding Track
Transition Pieces
Overlap Stairnose
Overlap Stairnose
Overlap Stairnose

This coordinating trim piece provides the proper transition for all the stairs in your home that are laminate flooring.

Back to Selection
Overlap Stairnose
Transition Pieces
Quarter Round
Quarter Round
Quarter Round

Trim your walls or baseboards with this simple-to-install finishing touch which effectively covers expansion joints.

Back to Selection
Quarter Round
Transition Pieces
T-Molding
T-Molding
T-Molding

T-Molding is commonly used in doorways to join two laminate floors in adjoining rooms. It's also recommended when making transitions from a laminate floor to another floor that is approximately the same height.

Back to Selection
T-Molding

Find a Shaw Floors Dealer